PCI 16 Opto-In +
16 Opto-Out

The PCI 16 channels photo isolator input/output adapter is a 32 bits PCI bus board with Plug and Play (PnP) features, it is a programmable I/O interface card for PC/486, Pentium, or compatibles. The PnP features let hardware configuration for IRQ and I/O address is detected by BIOS automatically, you don't need set switch and jumper. The PCI 16 channels photo isolator input/output adapter provides 16 photo couple digital input/output channels, which allow the input/output signals to be completely floated and prevent the ground loop.

Bus:32 bits PCI bus with Plug and Play (PnP) features.

Function:

• Support 16 photo couple input/output channels.

• Allow the photo input/output signals to be completely floated and prevent the ground loops.

• 16 LED correspond to 16 output ports activation status.

• By using 4N33 photo couple chips.

• 1500V isolation voltage.

• Maximum load voltage is 30V

• Maximum 80mA input current.

• Voltage range from 0V to 30V, where 0 to 3V is OFF and 5V to 30V is ON

• By using 4N33 photo couple chips.

• Relative humidity rage from 0 to 90%.

Software/Driver:

English manual with adjusting plan, terminal diagram, data sheets and sample programs
Windows-XP/7/8/10/11, Linux driver or info

The package contains:

OPOP-16 Board, flat cable with 37 pins connector. Software-CD, Manual